XTOOL F2 Ultra UV Business Card Jig - 6 Card Holder for Laser Engraving

For Metal Business Cards, this Jig is for Laser Engraving.
 Fits BOTH The Xtool Ultra Machines (F1/F2/F2 UV) - - PLUS- Fiber Lasers Beds! Holes for all.

• ⭐️FREE XTool F2 Ultra UV - and also - the Lightburn Fiber TEMPLATES! (After you place your order).
• The Jig is a Physical Product- shipped to you!!
• ⭐️Cards slide easily in and out sideways - OR you can lift them out EASILY because it’s designed so you can get your finger just underneath them.

READ ENTIRE AD/ Know what you are buying this for.

We have another listing that IS NOW THE SAME - same price - Both now fit Fiber and Xtool Ultra. They look the same.

• This one fits both Xtool and Fiber.
• Fits 86x54mm cards (NOT sports cards or game playing cards).
• Jig is 3d printed out of plastic - but simple metal business card engraving doesn't require long burns (if you did - you'd destroy your cards!). So no melting issues here (Read limitations below - Obviously not for long engraves with full coverage images on cards & No cutting!).
• Unlike a jig made out of wood, moisture will not cause this to warp or delaminate.

⭐️

• SPECS: +-Designed for Xtool Ultra AND Fiber Laser beds - but will sit on any Diode, CO2, Fiber bed with bolt spacing indicated below>>>
• +-BOLT SPACING: ----- Fiber: 25mm to 50mm bolt spacing. Bolt holes are 6mm. Bolts not included. ----- Xtool Ultras their proprietary bolt spacing. Bolt holes are 4mm. Bolts not included.
• +-Fits 86x54mm Aluminum Cards (measure yours before you buy This is NOT made for sports trading cards which are NOT this size. Cards not included.
• +-Capacity: 6 Cards.
• +-Tolerances: Super Precise! There is only 0.2mm of play to allow easy in and out - tight enough for consistent accuracy.
• +-Overall Dimensions of the Jig: 212mm x 175mm.
  +-Overall Dimensions of the workspace: 175mm x 175mm - so if using Fiber Galvo - recommend a lens size larger than 175mm. (I used 300mm to design template - but a 200 would work). If using a non-galvo (i.e. CO2 or Diode bed/gantry setup - it doesn't matter as long as your bed useable workspace is 212mm long).
• AFTER YOU PLACE YOUR ORDER, DOWNLOAD YOUR FREE XCS and LIGHTBURN (NOT EzCad) TEMPLATES ITs NOT COMPATIBLE WITH EZCAD.
• ⭐️LIMITATIONS: 1. Do not use for cutting. Extended lasering (I.e. photos will melt). This is intended for marking new business cards - not cutting them.
• 2. Do not use with rotary or CNC machines. Those will move the cards unless you clamp the edges.
• 3. If you’re using Air Assist (commonly seen with diode/gantry machines) - the air could make the cards move. So it’s not recommended - unless the cards are clamped. Or, just turn off the air assist.
• 4. The Lightburn Template File will only work with Lightburn. I don't have another template for other software - but they are easy to make. I only made the template for the XCS using the F2 UV - but you can convert it yourself to work with any other Ultra version.
• 5. If you’re using a diode, UV, or CO2 gantry bed (not Galvo machine) - then you may have to “ungroup” the Lightburn Template and slightly adjust the positions of the card outlines. Then regroup them & adjust accordingly for bed centering. This is because the Galvo machines have some distortion at the edges and this template was built on a Galvo bed using a 300mm lens. Easy to do. Ask questions before ordering!⭐️⭐️⭐️⭐️⭐️