{"title":"Laser Jigs (XTool\/Fiber) Products","description":"\u003cp\u003eLaser jigs, coin jigs, XTool, Fiber, UV, tons of them!\u003c\/p\u003e","products":[{"product_id":"pmag-magazine-laser-jig-tool-both-sides-included-fits-gen-2-3-magpul","title":"PMAG Magazine Laser Jig TOOL - Both Sides included (fits gen 2 \u0026 3 MagPul)","description":"\u003cp\u003e\u003cem\u003e(\u003cstrong\u003eCOMPLIANCE STATEMENT\u003c\/strong\u003e: This is a Laser Engraving Jig Tool - NOT a “part”, doesn’t “attach” to any wea pon - nor is it an accessory for that. It’s used for artwork).\u003c\/em\u003e \u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003eWHAT'S INCLUDED\u003c\/span\u003e: Polymer Magazine (Magpul) Laser Jig Set for PMAG 30 rd 223\/556 mags.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eINCLUDES a Left and a Right (So, you only need ONE set). (\u003cem\u003eBolts not included\u003c\/em\u003e).\u003c\/li\u003e\n\u003cli\u003eOnly Fits Gen 2 and Gen 3.\u003c\/li\u003e\n\u003cli\u003eMany hours put into this design. Many mounting holes. 3d printed by me \u0026amp; used for Lasering my own. \u003cspan style=\"text-decoration: underline;\"\u003eAgain - you’re only buying the red colored jigs - JUST A TOOL.\u003c\/span\u003e You will receive 2 jigs - one left and one right. So only buy a quantity of ONE if you only want ONE set to do both sides of your jig.\u003c\/li\u003e\n\u003cli\u003eREAD ALL BEFORE YOU BUY PLEASE- NO we \u003cstrong\u003edon’t\u003c\/strong\u003e sell the files.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hot Fabs LLC","offers":[{"title":"Default Title","offer_id":47544250007805,"sku":null,"price":25.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/8669\/1069\/files\/580295a6-il_fullxfull.4848581939_m1un.jpg?v=1779402864"},{"product_id":"40mm-coin-jigs-for-xtool-fiber-fits-f1-f2-both-ultras-fiber-lasers-all-in-one-steel-wont-melt-free-templates-xcs-lightburn","title":"40mm Coin Jigs for XTOOL + FIBER - Fits F1\/F2, Both Ultras+Fiber Lasers (All-in-One!) Steel Won't Melt! - Free Templates (XCS, Lightburn)","description":"\u003cp\u003e\u003cstrong\u003eAll-in-ONE 40mm COIN JIGS - With *FREE TEMPLATES! Solid Steel !\u003c\/strong\u003e \u003cbr\u003eFITS ALL These: *(\u003cem\u003eREAD ALL FIT NOTES DOWN BELOW\u003c\/em\u003e)\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eXTOOL F1\/F2 Laser\u003c\/li\u003e\n\u003cli\u003eXTOOL F1\/F2 ULTRA Laser\u003c\/li\u003e\n\u003cli\u003eOther FIBER Lasers using 6mm bolt beds (See spacing specs below).\u003c\/li\u003e\n\u003cli\u003eTemplates only for F1, F1 ULTRA \u0026amp; Fiber lightburn at the moment. \u003cstrong\u003eBut the F1 \u0026amp; F2 have same beds; and the Ultras have the same beds. So you can easily save the template as the other)\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e(****IMPORTANT: READ ALL SPECS BEFORE BUYING \u0026amp; LOOK at ALL PHOTOS BEFORE YOU BUY)\u003c\/li\u003e\n\u003cli\u003eOn all models, there will be some light tooling marks near holes where the automated cutter makes contact with the surface while traveling. \u003cem\u003eThis is normal\u003c\/em\u003e.\u003c\/li\u003e\n\u003cli\u003eNOTE: We may have a few \"BLEMS\" - which are noted as an option. They have \"more numerous\" surface scratches from tooling while cutting; and\/or sanding\/scratched areas that make the surface non-uniform in appearance - However, they are just as precise - as none of the holes are blemished - these are HEAVILY discounted. All tolerances remain in tact. Please be aware of what you are buying before you order.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt specifically for the Xtool F1, F2 beds AND F1 ULTRA, F2 ULTRA, F2 ULTRA UV laser bed - but ALSO has extra holes for mounting on a Fiber Laser\u003c\/strong\u003e (if it has standard 25mm or 50mm bolt spacing - which is normally what a JPT or MOPA has)!\u003c\/li\u003e\n\u003cli\u003eSo, if you own 1 of the above lasers; all of them - or will in the future - \u003cem\u003eNO need to buy Another Jig!\u003c\/em\u003e :-)\u003c\/li\u003e\n\u003cli\u003eSuper Precise, Steel Laser Jig for Laser Engraving - 40mm Jig Size. \u003cem\u003eCoins in photos are not included.\u003c\/em\u003e **\u003cem\u003eThis item is Patent Pending.\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003e\u003cstrong\u003ePLEASE NOTE: Due to these jigs accommodating 3 different machines (and X-Tool not placing bolt holes exactly centered on their beds) the jig will sit SLIGHTLY OFF CENTER on F1 \u0026amp; Ultra beds (see photos!)\u003c\/strong\u003e\u003c\/em\u003e - \u003cem\u003e\u003cstrong\u003ehowever, our free templates ASSURE functional placement.\u003c\/strong\u003e \u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003eIt is built SPECIFICALLY FOR F1\/F2, F1 Ultra \u0026amp; F2 ULTRA, and Fiber beds!\u003c\/li\u003e\n\u003cli\u003eWE USE Them Ourselves- They Work GREAT.\u003c\/li\u003e\n\u003cli\u003eNOTE: We built the XTool templates using an F1 and an F1 ULTRA - which have same size bed and hole spacing as the newer F2 and F2 ULTRA series. So keep in mind that although the XCS templates for Xtool will work - \u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003ethey could be slightly off.\u003c\/em\u003e\u003c\/span\u003e All you need to do is ungroup the items in the template, nudge them to match your jig while framing (NOT the Xtool Camera!), then regroup them.\u003c\/li\u003e\n\u003cli\u003eThe Xtool camera is skewed and not for exact placement reference. \u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003eNote on Coin Blanks:\u003c\/span\u003e Some of the cheaper blanks you find on Amazon, Ebay, or Etsy - are slightly less than 40mm - about 39.90mm. They will work with this jig. But expect more play than the higher quality machined blanks - which is still mostly imperceptible!). Keep this in mind if using the cheaper coin blanks which are slightly smaller. I use them and it works for me for all coins if they are close to 40mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003cli\u003e**IMPORTANT - READ ALL BEFORE BUYING. For in-depth preview - watch the instructional video link farther down below on this page...\u003c\/li\u003e\n\u003cli\u003eThis jig is 3mm thick steel. Will not melt, or burn like 3d printed - or wood jigs. IF you are deep engraving metal coins - you need this jig due to the heat.\u003c\/li\u003e\n\u003cli\u003eIt also has a slot for picking the coin blanks out. 40mm Jig: Opening is exactly 40.2mm. So, check your actual coin diameter. This opening is a little over 40mm to precisely fit the more expensive coins that are exactly 40mm. This allows for EXACT placement without getting stuck during hotter engraves.\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eIMPORTANT PLACEMENT NOTE for the 5 coin jig ONLY:\u003c\/span\u003e \u003c\/strong\u003e(SEE PHOTOS) - The Xtool beds are built with bolt holes on separate distance and patterns between the F1\/F2 \u0026amp; Ultras. In order to create this all-in-one (fits all) unit - the mounting holes were drilled in the center of the jig. When you mount this jig on your Ultra - it will sit slightly off center.\u003c\/em\u003e This affects NOTHING. See the photos.\u003c\/li\u003e\n\u003cli\u003eOn the F1\/F2, you'll see in the photo that the F1\/F2 bed is too small to accommodate more than 3 coins \u0026amp; keep this an all in one jig. Our templates are built with this in mind and will assist you in exact placement. Do not worry - it doesn't affect functionality.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eWHAT'S INCLUDED\u003c\/span\u003e\u003c\/strong\u003e: 1 Steel Coin Jig. YOU Choose between a SINGLE, DOUBLE or FIVER** (\"Blems also available heavily discounted). **(however, the FIVER will ONLY accommodate 3 coins on an X-Tool F1\/F2 due to it's small bed size - SEE PHOTO).\u003c\/li\u003e\n\u003cli\u003eHoles fit 3mm (M3) for F1\/F2 beds; 4mm (M4) for Ultra beds ; and 6mm (M6) for Fiber (bolts are NOT included). But readily available at the hardware store or amazon.\u003c\/li\u003e\n\u003cli\u003eFor the FREE TEMPLATES DOWNLOAD after purchase, you will receive the free software templates.\u003c\/li\u003e\n\u003cli\u003eINSTRUCTION\/PREVIEW VIDEO HERE \u0026gt;\u0026gt;\u0026gt; https:\/\/youtu.be\/DJbPjJxWKro?si=uk13m8T9UtLupE4m\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/span\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLaser Capacity Limits -\u003c\/li\u003e\n\u003cli\u003eSINGLE COIN JIG fits 1 coin.\u003c\/li\u003e\n\u003cli\u003eDOUBLE COIN JIG fits 2 coins.\u003c\/li\u003e\n\u003cli\u003eFIVE COIN JIG: +On the Xtool F1\/F2 Laser bed is smaller and will ONLY fit 3 COINS; +On the Xtool F1 \u0026amp; F2 Ultra Laser bed fits 5 COINS; +On standard Fiber Lasers fits 5 COINS.\u003c\/li\u003e\n\u003cli\u003eCoin Size Opening 40mm Jig: Exactly 40.2mm - (Real \"40mm\" blanks\/coins will NOT slide around at all.)\u003c\/li\u003e\n\u003cli\u003eBolt Opening Diameter 3mm holes for the Xtool F1\/F2 bed, 4mm for the Ultra - PLUS 6mm holes to fit a Fiber Laser Beds! Bolt Spacing Exactly spaced to fit the F1\/F2 \u0026amp; F1\/F2 Ultra beds \u0026amp; for the Fiber Lasers, the bolt spacing is 25.0 \u0026amp; 50.0mm center to center (verify yours!).\u003c\/li\u003e\n\u003cli\u003eThickness - 3mm (.119) Material - Mild Steel or Stainless depending on market prices and availability- all have same specs though.\u003c\/li\u003e\n\u003cli\u003eAgain, measure your coins.\u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e I am not responsible if you buy this and your coin is over 40.0mm-or if it is grossly under 40mm.\u003c\/em\u003e \u003c\/span\u003eThis jig is GUARANTEED TO FIT (depending on the jig size you choose) the brass 40mm blanks from HeavyMetalBlanksCo available on Etsy - or their website. Those are the coins I designed the jigs around. \u003cbr\u003e*There will be some carbon marks \u0026amp; some tooling marks on these from production*. This doesn’t affect performance and each one is inspected and deburred where machines moved.\u003c\/li\u003e\n\u003cli\u003eQuestions - please ask before buying. Thanks\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hot Fabs LLC","offers":[{"title":"SINGLE COIN JIG","offer_id":47544250401021,"sku":null,"price":23.0,"currency_code":"USD","in_stock":true},{"title":"DOUBLE COIN JIG","offer_id":47544250433789,"sku":null,"price":28.0,"currency_code":"USD","in_stock":true},{"title":"FIVE COIN JIG","offer_id":47544250466557,"sku":null,"price":53.0,"currency_code":"USD","in_stock":true},{"title":"FIVE COIN JIG (BLEM)","offer_id":47544250499325,"sku":null,"price":44.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/8669\/1069\/files\/99463b1d-il_fullxfull.7556546397_jf70.jpg?v=1779402944"},{"product_id":"coin-jig-size-adapters-steel-50mm-40mm-25mm-1-25","title":"COIN JIG Size ADAPTERS (Steel) 50mm\/40mm\/25mm\/1.25\"","description":"\u003cp\u003e\u003cstrong\u003eCOIN JIG SIZE ADAPTERS (STEEL) 50mm\/40mm\/25mm\/1.25\" These adapters work with our existing STEEL coin jigs (only ours).\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe GREAT THING is that if you already bought one of our 40mm coin jigs or our 50mm coin jigs - and you want to do a different coin size that you don't do very often - you DON’T have to buy a whole new JIG!\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eThese adapters fit as precisely - with the same tolerances - as our existing jigs.  These are either mild steel or stainless depending on availability and cost of materials which varies greatly from month to month.  We make them out of the steel at the time which keeps our price to you consistent.  So you may either get stainless or mild A36.  Both are same tolerance.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMake certain you read below about coin sizing variations and how that can affect tolerances. If you need one of our 40mm or 50mm Jigs - please see our other listings or favorite our shop.\u003c\/li\u003e\n\u003cli\u003eThese Adapters are Sold Individually in the Following Sizes: * 50mm to 40mm * 40mm to 25mm * 40mm to 1.25”\u003c\/li\u003e\n\u003cli\u003eNote that in order to go down to the 25mm or 1.25\" size coin blanks, \u003cem\u003eyou either need to have a 50mm jig AND a 50mm to 40mm adapter; OR just a 40mm jig. (See photo examples). \u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"text-decoration: underline;\"\u003eIMPORTANT NOTE\u003c\/span\u003e on Coin Blanks: Some of the cheaper 50mm coin blanks you find on Amazon, Ebay, or Etsy - are slightly less than 50mm - about 49.90. We even ran across a nice brushed one that measures 49.5!! That would be too sloppy. \u003cspan style=\"text-decoration: underline;\"\u003eIT is CRITICAL that you know what the measurement of your coin blanks are - or there could be unacceptable play!\u003c\/span\u003e Another example (regarding 40mm coin blanks) some are slightly less than 40mm - about 39.90mm. The same issues surround \"25mm” and “1.25 inch” coin blanks. They will work with this jig, but if their sizing is small, expect more play than the higher quality machined blanks.\u003c\/li\u003e\n\u003cli\u003eWe have no control over your stock choices. You must measure your coins to know the tolerances before buying.\u003c\/li\u003e\n\u003cli\u003ePLEASE DO YOURSELF A FAVOR before buying any of our jigs or adapters - and have some sample coins on hand to measure with a micrometer before you invest in our jigs.\u003c\/li\u003e\n\u003cli\u003eIf you don't have one of our Steel Coin Jigs - please visit our storefront and see our multiple listings for steel coin jigs.\u003c\/li\u003e\n\u003cli\u003ePlease ask before buying if you have questions.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hot Fabs LLC","offers":[{"title":"50mm to 40mm Adapter","offer_id":47544251023613,"sku":null,"price":9.0,"currency_code":"USD","in_stock":true},{"title":"40mm to 25mm Adapter","offer_id":47544251056381,"sku":null,"price":9.0,"currency_code":"USD","in_stock":true},{"title":"40mm - 1.25” Adapter","offer_id":47544251089149,"sku":null,"price":9.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/8669\/1069\/files\/7f1ffa81-il_fullxfull.6734786484_a4yz.jpg?v=1779403011"},{"product_id":"40mm-coin-jig-all-steel-will-not-melt-for-laser-engraving","title":"40mm Coin Jig - ALL STEEL - will not melt. For laser engraving.","description":"\u003cp\u003e\u003cstrong\u003eSuper Precise, Steel Laser Jig for 40mm Coins - for FIBER Laser Engraving Machines (Note: All of these jigs now fit the X-Tool F1\/F2; X-Tool F1\/F2 Ultra and Fiber Lasers that match the description below.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePlease see the updated photo with all the holes shown) - We now have SINGLE, DOUBLE, \u0026amp; 5 Coin Holders (\"Fiver\")!!\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBoost your Production!! (select your option). Coins in photos are not included. **\u003cem\u003eThis item is Patent Pending\u003c\/em\u003e.\u003c\/li\u003e\n\u003cli\u003e(Note, some of the cheaper coin blanks you find on Amazon, Ebay, or Etsy - that are slightly less than 40mm - about 39.89mm. They will work with this jig. But expect appx 0.3mm of play - which is still mostly imperceptible!). High quality machined coin blanks that are exactly 40.0mm are perfect and this jig allows for slight expansion, as it should, during deep relief engraving.\u003c\/li\u003e\n\u003cli\u003eNOTE: Occasionally, we have a few \"Blems\" - they have slight increases in surface scratches from tooling while cutting - However, they are just as precise - as none of the holes are blemished - these are HEAVILY discounted.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e**\u003cem\u003e\u003cstrong\u003eIMPORTANT - READ ALL BEFORE BUYING.\u003c\/strong\u003e\u003c\/em\u003e Opening is exactly 40.2mm. \u003cem\u003eSo, check your actual coin diameter.\u003c\/em\u003e This opening is a little over 40mm to precisely fit the more expensive coins that are exactly 40mm.\u003c\/p\u003e\n\u003cp\u003eThis jig is 3mm thick steel. Will not melt, or burn like 3d printed - or wood jigs. IF you are deep engraving metal coins - you need this jig due to the heat.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eWHAT'S INCLUDED\u003c\/span\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 Steel Coin Jig (select if you want single, double, or 5 - each priced differently). \u003cem\u003e6mm bolts are NOT included.\u003c\/em\u003e But readily available at the hardware store or amazon.\u003c\/li\u003e\n\u003cli\u003eSpecifications: Coin Opening - Exactly 40.2mm - Real \"40mm\" blanks\/coins will NOT slide around at all.\u003c\/li\u003e\n\u003cli\u003eBolt Hole Diameter - Slightly larger than 6mm so will not move - a 6mm bolt fits perfectly \u0026amp; easily. \u003cbr\u003eBolt Spacing - Exactly 50.0mm center to center. So check your bed bolt spacing. (We have other Xtool F1 jigs available in other listings that use the smaller bolt holes).(\u003cem\u003ewarning: ComMarker uses 5mm bolts\u003c\/em\u003e)\u003c\/li\u003e\n\u003cli\u003eThickness - 3mm (.119)\u003c\/li\u003e\n\u003cli\u003eMaterial - Mild or stainless Steel\u003c\/li\u003e\n\u003cli\u003eOverall Width - 65mm (single) - Double, Quad \u0026amp; Fiver varies. \u003cspan style=\"text-decoration: underline;\"\u003eAgain, measure your coins. I am not responsible if you buy this and your coin is over 40.0mm-or if it is grossly under 40mm.\u003c\/span\u003e This jig is GUARANTEED TO FIT the brass 40mm blanks from HeavyMetalBlanksCo here on Etsy. Those are the coins I designed the jig around. They measure 40.0-40.08mm.\u003c\/li\u003e\n\u003cli\u003eThere will be some carbon marks \u0026amp; some tooling marks on these from production. Doesn't affect performance and each one is inspected and deburred where machines moved.\u003c\/li\u003e\n\u003cli\u003eQuestions - please ask before buying. Thanks\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hot Fabs LLC","offers":[{"title":"SINGLE(Fiber+Xtool)","offer_id":47544251121917,"sku":null,"price":23.0,"currency_code":"USD","in_stock":true},{"title":"DOUBLE (Fiber+Xtool)","offer_id":47544251154685,"sku":null,"price":28.0,"currency_code":"USD","in_stock":true},{"title":"FIVER(Fiber+XTool)","offer_id":47544251187453,"sku":null,"price":53.0,"currency_code":"USD","in_stock":true},{"title":"FIVER-Blem(Fbr\/Xtool","offer_id":47544251220221,"sku":null,"price":41.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/8669\/1069\/files\/6b8a0f20-il_fullxfull.4737314776_hmnv.jpg?v=1779403021"},{"product_id":"50mm-2-coin-jigs-fiber-laser-xtool-f1-f2-ultra-lasers-steel-wont-melt-free-templates","title":"50mm (2\") Coin Jigs (Fiber Laser, Xtool F1\/F2 \u0026 Ultra Lasers) Steel Won't Melt! - Free Templates","description":"\u003cp\u003e\u003cstrong\u003eAll-in-ONE 50mm (1.96\"\/2\") Laser COIN JIGS - With FREE TEMPLATES! Solid Steel ! Be sure to read what each version fits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNOTE: You must ADD the jig to your cart, THEN go back and add the bolts to your cart if you want BOTH.\u003c\/p\u003e\n\u003cp\u003eA \u003cspan style=\"text-decoration: underline;\"\u003etrue 50mm coin blank is 1.96\" (aka 2 inch coin) - So you should measure your coins to affirm fitment.\u003c\/span\u003e IN the specs below you'll see the exact diameter opening of our jigs. \u0026gt;\u0026gt;\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDOUBLE 50mm Coin Jig Fits all 3!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eXTOOL F1 \u0026amp; F2 Laser\u003c\/li\u003e\n\u003cli\u003eXTOOL F1 ULTRA \u0026amp; F2 ULTRA Laser\u003c\/li\u003e\n\u003cli\u003eFIBER Lasers using 6mm (M6) bolt beds (25mm-50mm spacing).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eQUAD 50mm Coin Jig Fits 2 below:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eXTOOL F1\/F2 ULTRA Lasers (\u003cem\u003eNOT the F1\/F2 small lasers\u003c\/em\u003e).\u003c\/li\u003e\n\u003cli\u003eFIBER Lasers using 6mm (M6) bolt beds (25mm-50mm spacing)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIn a nutshell, the double version has holes for all 3. \u003cbr\u003eQuad has holes for 2 - as stated above.\u003c\/p\u003e\n\u003cp\u003e**\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eREAD ALL SPECS BEFORE BUYING \u0026amp; LOOK at ALL PHOTOS BEFORE YOU BUY\u003c\/span\u003e\u003c\/strong\u003e**\u003c\/p\u003e\n\u003cp\u003eThis 50mm jig fits into the “All-in-One” category due to its multiple application sizing.\u003c\/p\u003e\n\u003cp\u003eIf one day, you own all 3 lasers mentioned above - NO need to buy Another Jig! :-). If you’re looking for different coin size jigs, we also sell our 40mm sized coin jigs; AND some jig adapters for 25mm \u0026amp; 1.25” coins TOO!! That could save you some money. \u003cbr\u003e\u003cem\u003eThis item is Patent Pending.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e*Our FREE Templates for Lightburn or XCS assure proper placement. You download them after purchasing here.  \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eNOTE\u003c\/strong\u003e\u003c\/span\u003e Machines can vary slightly in calibration, but the template outlines are adjustable if you ungroup them. *Note that we haven't made a specific F2 or F2 Ultra Template - but in XCS - you can open the appropriate F1 or F1 ULTRA template and it will be close - but may need “nudged” in position.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eIMPORTANT NOTE on COIN BLANKS:\u003c\/span\u003e Some of the cheaper blanks you find on Amazon, Ebay, or Etsy - are slightly less than 50mm - about 49.90. We even ran across a nice bushed one that measures 49.5!!. 49.5mm will be too sloppy. A 49.90 will work with this jig. But expect more play than the higher quality machined blanks close to the actual 50.0mm size (usually 49.97). \u003cbr\u003e\u003cstrong\u003e\u003cem\u003e\u003cspan style=\"text-decoration: underline;\"\u003eYou must measure your coins to know the tolerances before buying.\u003c\/span\u003e \u003c\/em\u003e\u003c\/strong\u003e**IMPORTANT - READ ALL BEFORE BUYING.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis jig is 3mm thick steel. Will not melt, or burn like 3d printed - or wood jigs. IF you are deep engraving metal coins - you need this jig due to the heat. It also has a slot for picking the coin blanks out. 50mm Jig: Opening is exactly 50.3mm(+\\-0.05). So, check your actual coin diameter. This opening is a little over 50mm to precisely fit the more expensive coins that are exactly 50mm AND allows for EXACT placement without getting STUCK during hotter engraves.\u003c\/li\u003e\n\u003cli\u003eIMPORTANT PLACEMENT NOTE for the Quad coin jig ONLY: \u003cem\u003eThe Quad is too big for the Original XTool F1\/F2 bed (small laser). So it only fits the F1 ULTRA, F2 ULTRA and Fiber Laser Beds\u003c\/em\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWHAT'S INCLUDED:\u003c\/strong\u003e 1 Steel Coin Jig. YOU Choose between DOUBLE or QUAD** **(however, Quad is not for F1 or F2). (NOTE IF YOU WANT Bed Bolts. They are machine-specific. AFTER you add the JIG you want, then come back and add the BOLTS. Then you can check out on the same order.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eREAD ABOUT BOLTS Please....\u003c\/li\u003e\n\u003cli\u003eHoles fit 3mm (M3) for F1\/F2 beds;\u003c\/li\u003e\n\u003cli\u003e4mm (M4) for Ultra beds ;\u003c\/li\u003e\n\u003cli\u003eand 6mm (M6) for Fiber (bolts are NOT included). \u003cspan style=\"text-decoration: underline;\"\u003eThey are AVAILABLE separately here as an add-on:\u003c\/span\u003e Sizes are as follows:\u003c\/li\u003e\n\u003cli\u003eM6 (for Fiber beds) (6mm diameter x 1.0 pitch x 8mm thread length) this will hold your new jig down tight and not stick up. Available in packs of 4. (please verify your fiber uses this size first). Bolts may be stainless or black steel.\u003c\/li\u003e\n\u003cli\u003eM4 (for Xtool Ultra beds) (4mm diameter x 0.7 pitch x 20mm thread length) this will protrude above the jig (not hold down tight) for easier removal and installation. With 4 of them it will be secure enough laterally, as this is how we use them.\u003c\/li\u003e\n\u003cli\u003eM3 (for Xtool F1\/F2 beds) (3mm diameter x 0.5 pitch x 15mm thread length) this will protrude above the jig (not hold down tight) for easier removal and installation. With 4 of them it will be secure enough laterally, as this is how we use them.\u003c\/li\u003e\n\u003cli\u003eINSTRUCTION\/PREVIEW VIDEO HERE \u0026gt;\u0026gt;\u0026gt; https:\/\/youtu.be\/DJbPjJxWKro?si=uk13m8T9UtLupE4m\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLaser Capacity Limits - DOUBLE COIN JIG fits 2 coins. QUAD COIN JIG fits 4 coins.\u003c\/li\u003e\n\u003cli\u003eCoin Size Opening 50mm Jig: Exactly 50.3mm(+\\-0.05) - (Real \"50mm\" blanks\/coins will NOT slide around at all.)\u003c\/li\u003e\n\u003cli\u003eBolt Opening Diameter 3mm holes for the Xtool F1\/F2 bed, 4mm for the Ultra - PLUS 6mm holes to fit a Fiber Laser Beds!\u003c\/li\u003e\n\u003cli\u003eBolt Spacing Exactly spaced to fit the F1, F2 \u0026amp;\/or F1\/F2 Ultra beds.\u003c\/li\u003e\n\u003cli\u003eAs for the Fiber Lasers, the bolt spacing is 25.0 \u0026amp; 50.0mm center to center (verify yours!).\u003c\/li\u003e\n\u003cli\u003eThickness - 3mm (.119) Material - Mild or stainless Steel\u003c\/li\u003e\n\u003cli\u003eAgain, measure your coins. I am not responsible if you buy this and your coin is over 50.0mm-or if it is grossly under 50mm.\u003c\/li\u003e\n\u003cli\u003eQuestions - please ask before buying. Thanks\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hot Fabs LLC","offers":[{"title":"QUAD COIN JIG","offer_id":47544251252989,"sku":null,"price":32.0,"currency_code":"USD","in_stock":true},{"title":"DOUBLE COIN JIG","offer_id":47544251285757,"sku":null,"price":22.0,"currency_code":"USD","in_stock":true},{"title":"FIBER bolts-4pk M6","offer_id":47544251318525,"sku":null,"price":4.99,"currency_code":"USD","in_stock":true},{"title":"ULTRA bolts-4pk M4","offer_id":47544251351293,"sku":null,"price":4.99,"currency_code":"USD","in_stock":true},{"title":"F1\/F2 bolts-4pk M3","offer_id":47544251384061,"sku":null,"price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/8669\/1069\/files\/93a0cf52-il_fullxfull.7556618253_xuqq.jpg?v=1779403038"},{"product_id":"business-card-jig-6-card-holder-for-fiber-laser-engraving-now-fits-xtool-ultra","title":"Business Card Jig - 6 Card Holder for Fiber Laser Engraving (now fits Xtool ULTRA!)","description":"\u003cp\u003eFor\u003cstrong\u003e Engraving Metal Business Cards - This Jig is for Fiber Laser Engraving.\u003c\/strong\u003e \u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003ePlus\u003c\/span\u003e - \u003cstrong\u003eFREE Lightburn TEMPLATE! (available after purchase).\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Jig is a Physical Product- shipped to you!!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003e\u003cspan style=\"text-decoration: underline;\"\u003eREAD ENTIRE AD.\u003c\/span\u003e\u003c\/em\u003e\u003c\/strong\u003e **THIS MODEL NOW IS IDENTICAL TO THE OTHER VERSION WE OFFER THAT FITS THE XTOOL ULTRA LASERS INCLUDING THE NEW F2 UV.\u003c\/p\u003e\n\u003cp\u003eBOTH WILL FIT XTOOL ULTRA AND FIBER BEDS - WE HAVE UPDATED PHOTOS ON OTHER AD FOR YOU TO SEE. THIS AD PHOTOS DO NOT SHOW THE XTOOL HOLES YET.\u003c\/p\u003e\n\u003cp\u003eSAME PRICE ALSO.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits 86x54mm cards (\u003cspan style=\"text-decoration: underline;\"\u003eNOT sports cards or regular playing cards!\u003c\/span\u003e). Jig is 3d printed out of plastic - but simple metal business card engraving doesn't require long burns (if you did - you'd destroy your cards!). So no melting issues here (Read limitations below - Obviously not for long engraves with full coverage images on cards \u0026amp; No cutting!).\u003c\/li\u003e\n\u003cli\u003eUnlike a jig made out of wood, moisture will not cause this to warp or delaminate.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSPECS:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e+-Designed for Fiber Laser beds (and Xtool Ultras) - but will sit on any Diode, CO2, Fiber bed with bolt spacing indicated below\u0026gt;\u0026gt;\u0026gt;\u003c\/li\u003e\n\u003cli\u003e+-BOLT SPACING: 25mm to 50mm bolt spacing on Fiber, \u003cem\u003e\u003cspan style=\"text-decoration: underline;\"\u003ePLUS - now with Xtool proprietary Ultra spacing(not shown in photos)\u003c\/span\u003e\u003c\/em\u003e.\u003c\/li\u003e\n\u003cli\u003eBolt holes are 6mm (ultra are 4mm). \u003cem\u003eBolts not included\u003c\/em\u003e. \u003cbr\u003e+-Fits 86x54mm Aluminum Cards (\u003cspan style=\"text-decoration: underline;\"\u003emeasure yours before you buy\u003c\/span\u003e). Cards not included.\u003c\/li\u003e\n\u003cli\u003e+-Capacity: 6 Cards.\u003c\/li\u003e\n\u003cli\u003e+-Tolerances: Super Precise! There is only 0.2mm of play to allow easy in and out - tight enough for consistent accuracy.\u003c\/li\u003e\n\u003cli\u003e+-Overall Dimensions of the Jig: 212mm x 175mm.\u003c\/li\u003e\n\u003cli\u003e+-Overall Dimensions of the workspace: 175mm x 175mm - so if using Fiber Galvo - recommend a lens size larger than 175mm. (I used 300mm to design template - but a 200 would work). If using a non-galvo (i.e. CO2 or Diode bed\/gantry setup - it doesn't matter as long as your bed useable workspace is 212mm long).\u003c\/li\u003e\n\u003cli\u003eFREE TEMPLATES.... ⭐️AFTER YOU PLACE YOUR ORDER, DOWNLOAD YOUR FREE XCS and LIGHTBURN (NOT EzCad)\u003c\/li\u003e\n\u003cli\u003eITs NOT COMPATIBLE WITH EZCAD.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLIMITATIONS:\u003c\/p\u003e\n\u003cp\u003e1. Do not use for cutting. Extended lasering (I.e. photos will melt). This is intended for marking new business cards - not cutting them.\u003c\/p\u003e\n\u003cp\u003e2. Do not use with rotary or CNC machines. Those will move the cards unless you clamp the edges.\u003c\/p\u003e\n\u003cp\u003e3. If you’re using Air Assist (commonly seen with diode\/gantry machines) - the air could make the cards move. So it’s not recommended - unless the cards are clamped. Or, just turn off the air assist.\u003c\/p\u003e\n\u003cp\u003e4. The Lightburn Template File will only work with Lightburn. I don't have another template for other software - but they are easy to make. I will send your Lightburn Template File after you order, via messaging or email - when I ship your jig.\u003c\/p\u003e\n\u003cp\u003e5. If you’re using a diode, UV, or CO2 gantry bed (not Galvo machine) - then you may have to “ungroup” the Lightburn Template and slightly adjust the positions of the card outlines. Then regroup them \u0026amp; adjust accordingly for bed centering. \u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003eThis is because the Galvo machines have some distortion at the edges and this template was built on a Galvo bed using a 300mm lens.\u003c\/em\u003e\u003c\/span\u003e Easy to do. Ask questions before ordering!\u003c\/p\u003e","brand":"Hot Fabs LLC","offers":[{"title":"Default Title","offer_id":47544252039421,"sku":null,"price":18.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/8669\/1069\/files\/4d43210d-il_fullxfull.5273488463_2r9h.jpg?v=1779407299"},{"product_id":"xtool-f1-f2-single-coin-jigs-all-steel-wont-melt-also-fits-ultra-f1-f2-uv-fiber-lasers-1-25-or-40mm-choices","title":"XTool F1\/F2 Single Coin Jigs - All STEEL - Won't Melt. (also Fits ULTRA F1\/F2\/UV \u0026 Fiber Lasers - 1.25\" or 40mm Choices)","description":"\u003ch2 id=\"tinymce_scroll_sign\"\u003eXTool F1 F2 Coin Jig: Precision and Durability Combined\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBuilt specifically for the Xtool F1\/F2 laser - but ALSO has extra holes for mounting on a Fiber Laser! (NEW! THIS NOW WILL FIT THE ULTRA!\u003c\/strong\u003e . \u003cbr\u003e\u003cem\u003eWE HAVE PHASED out the 1.25” Jigs - BUT have the 40mm to 1.25 Adapters!! So see our other listing for that.)\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWith these, there is NO need to buy Another Jig! :-) Super Precise, Steel Laser Jig for Laser Engraving -\u003c\/li\u003e\n\u003cli\u003eCHOOSE Either 1.25\" (Now as an adapter) And\/or the 40mm Jig Size. \u003cem\u003eCoins in photos are not included.\u003c\/em\u003e **\u003cem\u003eThis item is Patent Pending.\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003eNOTE, some of the cheaper coin blanks you find on Amazon, Ebay, or Etsy - that are slightly less than 40mm - about 39.90mm, or , less than 1.25\". They will work with this jig. But you need to expect more play than the higher quality machined blanks - which is still mostly imperceptible!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e.*\u003cem\u003eIMPORTANT\u003c\/em\u003e - \u003cspan style=\"text-decoration: underline;\"\u003eREAD ALL BEFORE BUYING\u003c\/span\u003e.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis jig is 3mm thick steel. Will not melt, or burn like 3d printed - or wood jigs. IF you are deep engraving metal coins - you need this jig due to the heat.\u003c\/li\u003e\n\u003cli\u003eIt also has a slot for picking the coin blanks out.\u003c\/li\u003e\n\u003cli\u003e40mm Jig: Opening is exactly 40.2mm. So, check your actual coin diameter. This opening is a little over 40mm to precisely fit the more expensive coins that are exactly 40mm.\u003c\/li\u003e\n\u003cli\u003e1.25\" Jig adapter: Opening is 1.256\" (31.9mm). Good blanks are usually nearly exactly 1.25\" (31.75mm). This allows for EXACT placement without getting stuck during hotter engraves.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eWHAT'S INCLUDED:\u003c\/span\u003e \u003c\/strong\u003e1 Steel Coin Jig - Choose 1.25\" adapter and\/or 40mm jig. \u003cem\u003e3mm (M3), 4mm (M4) and 6mm (M6) bolts are \u003cspan style=\"text-decoration: underline;\"\u003eNOT\u003c\/span\u003e included\u003c\/em\u003e. (But readily available within our 50mm jig listing as a 4 pack, the hardware store or Amazon.)\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSpecifications: 40mm Jig: Exactly 40.2mm - (Real \"40mm\" blanks\/coins will NOT slide around at all.) Bolt Diameter - 3mm holes for the Xtool F1\/F2 bed, 4mm holes for the Ultras, PLUS 6mm holes to fit a Fiber Laser Beds!\u003c\/li\u003e\n\u003cli\u003eBolt Spacing - Exactly spaced to fit the F1\/F2 bed, F1 Ultra \u0026amp; F2 Ultra \u0026amp; for the Fiber Lasers, spacing is 50.0mm center to center.\u003c\/li\u003e\n\u003cli\u003eThickness - 3mm (.119) Material - Mild or stainless Steel\u003c\/li\u003e\n\u003cli\u003eOverall Width - 65mm Again, \u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003emeasure your coins\u003c\/em\u003e\u003c\/span\u003e. I \u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003eam not responsible if you buy this and your coin is over 1.25\", 40.0mm-or if it is grossly under 1.25\" or 40mm.\u003c\/em\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eThis jig is GUARANTEED TO FIT (depending on the jig size you choose) the brass 1.25\", or 40mm blanks from HeavyMetalBlanksCo found on Etsy. Those are the coins I designed the jig around. \u003cbr\u003eThere will be \u003cem\u003esome carbon marks \u0026amp; some tooling marks on these from production\u003c\/em\u003e. Doesn't affect performance and each one is inspected and deburred where machines moved.\u003c\/li\u003e\n\u003cli\u003eQuestions - please ask before buying. Thanks\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hot Fabs LLC","offers":[{"title":"40mm Coin Jig","offer_id":47544252203261,"sku":"40MMJIG","price":23.0,"currency_code":"USD","in_stock":true},{"title":"1.25” Adapter","offer_id":47544252236029,"sku":"125ADAPTR","price":9.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/8669\/1069\/files\/b3d0d669-il_fullxfull.7556688863_flu5.jpg?v=1779403151"},{"product_id":"xtool-f2-ultra-uv-business-card-jig-6-card-holder-for-laser-engraving","title":"XTOOL F2 Ultra UV Business Card Jig - 6 Card Holder for Laser Engraving","description":"\u003cp\u003e\u003cstrong\u003eFor Metal Business Cards, this Jig is for Laser Engraving\u003c\/strong\u003e. \u003cbr\u003e \u003cstrong\u003eFits BOTH The Xtool Ultra Machines (F1\/F2\/F2 UV) - - PLUS- Fiber Lasers Beds! Holes for all.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e⭐️FREE XTool F2 Ultra UV - and also - the Lightburn Fiber TEMPLATES! (After you place your order).\u003c\/li\u003e\n\u003cli\u003eThe Jig is a Physical Product- shipped to you!!\u003c\/li\u003e\n\u003cli\u003e⭐️Cards slide easily in and out sideways - OR you can lift them out EASILY because it’s designed so you can get your finger just underneath them.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eREAD ENTIRE AD\/ Know what you are buying this for.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe have another listing that IS NOW THE SAME - same price - Both now fit Fiber and Xtool Ultra. They look the same.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003eThis one fits both Xtool and Fiber.\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003eFits 86x54mm cards (\u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003eNOT\u003c\/em\u003e\u003c\/span\u003e sports cards or game playing cards).\u003c\/li\u003e\n\u003cli\u003eJig is 3d printed out of plastic - but simple metal business card engraving doesn't require long burns (if you did - you'd destroy your cards!). So no melting issues here (Read limitations below - Obviously not for long engraves with full coverage images on cards \u0026amp; No cutting!).\u003c\/li\u003e\n\u003cli\u003eUnlike a jig made out of wood, moisture will not cause this to warp or delaminate.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e⭐️\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSPECS: +-Designed for Xtool Ultra AND Fiber Laser beds - but will sit on any Diode, CO2, Fiber bed with bolt spacing indicated below\u0026gt;\u0026gt;\u0026gt;\u003c\/li\u003e\n\u003cli\u003e+-BOLT SPACING: ----- Fiber: 25mm to 50mm bolt spacing. Bolt holes are 6mm. Bolts not included. ----- Xtool Ultras their proprietary bolt spacing. Bolt holes are 4mm. \u003cem\u003eBolts not included\u003c\/em\u003e.\u003c\/li\u003e\n\u003cli\u003e+-Fits 86x54mm Aluminum Cards (\u003cspan style=\"text-decoration: underline;\"\u003emeasure yours before you buy This is NOT made for sports trading cards which are NOT this size\u003c\/span\u003e. \u003cem\u003eCards not included\u003c\/em\u003e.\u003c\/li\u003e\n\u003cli\u003e+-Capacity: 6 Cards.\u003c\/li\u003e\n\u003cli\u003e+-Tolerances: Super Precise! There is only 0.2mm of play to allow easy in and out - tight enough for consistent accuracy.\u003c\/li\u003e\n\u003cli\u003e+-Overall Dimensions of the Jig: 212mm x 175mm. \u003cbr\u003e+-Overall Dimensions of the workspace: 175mm x 175mm - so if using Fiber Galvo - recommend a lens size larger than 175mm. (I used 300mm to design template - but a 200 would work). If using a non-galvo (i.e. CO2 or Diode bed\/gantry setup - it doesn't matter as long as your bed useable workspace is 212mm long).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAFTER YOU PLACE YOUR ORDER, DOWNLOAD YOUR FREE XCS and LIGHTBURN (NOT EzCad) TEMPLATES\u003c\/strong\u003e \u003cem\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eITs NOT COMPATIBLE WITH EZCAD\u003c\/span\u003e\u003c\/strong\u003e.\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e⭐️LIMITATIONS: 1. Do not use for cutting. Extended lasering (I.e. photos will melt). This is intended for marking new business cards - not cutting them.\u003c\/li\u003e\n\u003cli\u003e2. Do not use with rotary or CNC machines. Those will move the cards unless you clamp the edges.\u003c\/li\u003e\n\u003cli\u003e3. If you’re using Air Assist (commonly seen with diode\/gantry machines) - the air could make the cards move. So it’s not recommended - unless the cards are clamped. Or, just turn off the air assist.\u003c\/li\u003e\n\u003cli\u003e4. The Lightburn Template File will only work with Lightburn. I don't have another template for other software - but they are easy to make. I only made the template for the XCS using the F2 UV - but you can convert it yourself to work with any other Ultra version.\u003c\/li\u003e\n\u003cli\u003e5. If you’re using a diode, UV, or CO2 gantry bed (not Galvo machine) - then you \u003cem\u003emay have to “ungroup” the Lightburn Template and slightly adjust the positions of the card outlines. Then regroup them \u0026amp; adjust accordingly for bed centering. This is because the Galvo machines have some distortion at the edges and this template was built on a Galvo bed using a 300mm lens. Easy to do\u003c\/em\u003e. Ask questions before ordering!⭐️⭐️⭐️⭐️⭐️\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hot Fabs LLC","offers":[{"title":"Default Title","offer_id":47551813222653,"sku":null,"price":18.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/8669\/1069\/files\/1d410bb2-il_fullxfull.7572108948_lbit.jpg?v=1779403190"},{"product_id":"laser-cnc-enclosure-fan-vent-adapter-4-dryer-hose","title":"Laser\/CNC Enclosure Fan Vent Adapter (4” dryer hose)","description":"\u003cp\u003e\u003cb\u003eAn adapter to connect a 4” (100mm) dryer hose to your laser or CNC enclosure.  This is a physical product shipped to you.\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eComes with one adapter (hose, fan and enclosure not included).\u003c\/li\u003e\n\u003cli\u003eUse a zip tie or clamp to secure it.\u003c\/li\u003e\n\u003cli\u003eOutside diameter is 4”\/100mm. Inside diameter is appx 3.8” (98mm).\u003c\/li\u003e\n\u003cli\u003eScrew holes are 5.25”\/134mm diagonal across \u0026amp; 3.75”\/95mm apart horizontal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDesigned to accommodate a computer fan inside the enclosure to exhaust fumes and smoke to a standard 4” clothes dryer duct.\u003c\/p\u003e\n\u003cp\u003eScrew holes are 4mm (appx 3\/16”)- can be easily drilled larger.\u003c\/p\u003e\n\u003cp\u003eThis item is 3d printed in The USA.\u003c\/p\u003e","brand":"Hot Fabs LLC","offers":[{"title":"Default Title","offer_id":47544252858621,"sku":null,"price":7.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/8669\/1069\/files\/3175c83d-il_fullxfull.3650467670_mfee.jpg?v=1779403241"},{"product_id":"xtool-f1-f2-laser-guide-fence-set","title":"XTool F1 \/ F2 Laser Guide\/Fence Set (8 pc) - Optional Bed \u0026 Bolts","description":"\u003ch2 id=\"tinymce_scroll_sign\"\u003eExplore the Benefits of the XTool F1 Laser Guide Set\u003c\/h2\u003e\n\u003ch1\u003e8 Piece F1 \u0026amp; F2 Laser Guide\/Fences Set.\u003c\/h1\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e(NOT for the ULTRA - We have a SEPARATE Listing for those). \u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e3D Printed Plastic Physical Item Shipped to you.\u003c\/p\u003e\n\u003cp\u003eF1 \u0026amp; F2's M3 bed bolts will fit through holes.\u003c\/p\u003e\n\u003cp\u003eFor your Satisfaction- \u003cspan style=\"text-decoration: underline;\"\u003eREAD ALL BEFORE BUYING So you know what's included and what is extra. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eOPTIONAL Add-On's (READ CAREFULLY): \u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cem\u003eOptional \u003c\/em\u003eBED REPLACEMENT:   Plastic, Non-Threaded for the F1 (DOES NOT FIT THE F2 - or the ULTRAs. \u003cspan style=\"text-decoration: underline;\"\u003eThe F2 BED IS NOT REPLACEABLE - DONT ORDER THAT OPTION FOR THE F2\u003c\/span\u003e) This optional F1 Replacement Bed will allow you to secure guides\/fences on it and then just swap out the whole bed with guides attached when changing projects. Note that being non-threaded, the bolt holes will secure the bolts - but over time, holes will loosen).\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eOptional \u003c\/em\u003eEXTRA BED BOLTS: Fit F1 AND the F2 Beds. If you include this option, you will get a Set of 8 bolts, size M3x15mm Stainless Bolts that will thread into original F1\/F2 Bed (required to secure the guide\/fence set into the Original Bed - but you can buy your own if you want).\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003e\u003cspan style=\"color: #2b00ff;\"\u003e - - - - - - MAIN PARTS FOR THE GUIDE SET - - - - - \u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e8 pc GUIDE SET INFO:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTotal of 8 pieces, 9mm wide - just like the original Xtool. 4mm thick. Any M3 size bolts which screw into original F1\/F2 bed will be snug - but slip through guide holes (non-threaded holes).\u003c\/li\u003e\n\u003cli\u003eIncludes: 1 short cross; 1 large cross (note the large cross can only be secured as shown in photos with one line of bolts - either horizontal or vertical); 2 Three-hole straight guides. 2 Four-hole straight guides. 1 Large Corner guide. 1 Small Corner guide.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eOPTIONAL Add-On Information\u003c\/span\u003e\u003c\/strong\u003e (add separately, as priced accordingly, at checkout):\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cspan style=\"text-decoration: underline;\"\u003eREPLACEMENT, NON-THREADED F1 PLASTIC BED ONLY FOR THE F1.\u003c\/span\u003e 3d printed to exact fit in F1. (Not the F2). Fits flush to frame \u0026amp; to same tolerances as original metal bed - but is not threaded for bolts. HOWEVER, M3 bolts will secure into it - but the more times you do that the looser the holes will become. It’s intended to secure guides into it so that you can quickly just pop out beds for different projects while doing repetitive projects - Save You Time!! and Time IS Money in this business!! \u003cspan style=\"text-decoration: underline;\"\u003eNOTE: It is NOT rated for HOT items\u003c\/span\u003e (i.e. metal). But will handle quick business card engraves, keychains, whatever \u0026amp; other items that don't heat so much to melt through their base.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"text-decoration: underline;\"\u003eSET OF 8 - SIZE M3x15mm BOLTS that will thread into original F1 or F2 Beds\u003c\/span\u003e (required to secure the guide\/fence set - but you can buy your own if you want). I sell them LONG so you can get your fingers on them. There's no need to clamp guides down. When there are enough bolts in them - it's good enough (I've tested it). \u003cem\u003eNOTE that I can't accept returns as once you've put bolts through them - I have no way to re-sell them if you sent them back with the holes deformed\u003c\/em\u003e. But as you can see in the photos - they fit perfect on my own F1 and I use my own stuff :-) or I wouldn't sell them to you.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003eCHECK OUT MY OTHER F1, F2 and ULTRA JIGS !! On MY SHOP. ASK QUESTIONS BEFORE ORDERING IF YOU HAVE ANY.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eEnhanced Precision for Laser Engraving and Cutting\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe XTool F1 laser guide set provides exceptional accuracy and control for your laser engraving and cutting projects. This 8-piece fence set is designed to ensure precise alignment, making it easier to handle various materials with consistent results. Whether you are a professional or hobbyist, the XTool F1 laser guide set enhances your machine’s capabilities by providing steady support and reducing material slip. Its optional bed and bolts add extra stability, further improving the quality of every cut or engraving.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eDurable and Easy to Install Components\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eCrafted with sturdy materials, the XTool F1 laser guide set offers long-lasting durability under regular use. Installation is straightforward, allowing users to quickly set up the fences on compatible XTool machines without hassle. The optional bed and bolts provide additional mounting flexibility, making the setup customizable for various working conditions. This means less downtime and more productive hours, especially when working on detailed or larger projects. The design ensures the fences maintain their position firmly throughout your workflow.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eVersatile Use for Various XTool Models\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThis laser guide set is versatile, compatible with both XTool F1 and F2 models, enhancing their precision and ease of use. It accommodates different project sizes and types, supporting a wide range of engraving and cutting tasks. The 8-piece configuration allows for multiple setup options, promoting efficiency and flexibility. Whether you need a fence for straight cuts or guides for more intricate designs, the XTool F1 laser guide set adapts well, making it an essential accessory for XTool machine owners aiming to achieve professional-grade results.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eEnhanced Precision for Laser Engraving and Cutting\u003c\/h3\u003e\n\u003cp\u003eThe XTool F1 laser guide set provides exceptional accuracy and control for your laser engraving and cutting projects. This 8-piece fence set is designed to ensure precise alignment, making it easier to handle various materials with consistent results. Whether you are a professional or hobbyist, the XTool F1 laser guide set enhances your machine’s capabilities by providing steady support and reducing material slip. Its optional bed and bolts add extra stability, further improving the quality of every cut or engraving.\u003c\/p\u003e\n\u003ch3\u003eDurable and Easy to Install Components\u003c\/h3\u003e\n\u003cp\u003eCrafted with sturdy materials, the XTool F1 laser guide set offers long-lasting durability under regular use. Installation is straightforward, allowing users to quickly set up the fences on compatible XTool machines without hassle. The optional bed and bolts provide additional mounting flexibility, making the setup customizable for various working conditions. This means less downtime and more productive hours, especially when working on detailed or larger projects. The design ensures the fences maintain their position firmly throughout your workflow.\u003c\/p\u003e\n\u003ch3\u003eVersatile Use for Various XTool Models\u003c\/h3\u003e\n\u003cp\u003eThis laser guide set is versatile, compatible with both XTool F1 and F2 models, enhancing their precision and ease of use. It accommodates different project sizes and types, supporting a wide range of engraving and cutting tasks. The 8-piece configuration allows for multiple setup options, promoting efficiency and flexibility. Whether you need a fence for straight cuts or guides for more intricate designs, the XTool F1 laser guide set adapts well, making it an essential accessory for XTool machine owners aiming to achieve professional-grade results.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Hot Fabs LLC","offers":[{"title":"8 Pc Guide Set ONLY","offer_id":47544252301565,"sku":null,"price":12.0,"currency_code":"USD","in_stock":true},{"title":"GuideSet+Bolts+F1bed","offer_id":47544252334333,"sku":null,"price":23.0,"currency_code":"USD","in_stock":true},{"title":"Guide Set+Bolts","offer_id":47544252367101,"sku":null,"price":15.0,"currency_code":"USD","in_stock":true},{"title":"Guide Set+F1 Bed","offer_id":47544252399869,"sku":null,"price":16.0,"currency_code":"USD","in_stock":true},{"title":"F1 BED Only (1 pc)","offer_id":47544252432637,"sku":null,"price":9.5,"currency_code":"USD","in_stock":true},{"title":"Bolts Only (8 pack)","offer_id":47544252465405,"sku":null,"price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/8669\/1069\/files\/9dc1a7ad-il_fullxfull.7508701436_5xvl.jpg?v=1779403253"},{"product_id":"xtool-f1-f2-card-jig-free-template","title":"XTool F1\/F2 Card Jig \u0026 FREE Template!","description":"\u003ch3\u003eMetal Business Card Jig for XTool F1 or F2 Laser Engraver. (NOT THE ULTRA).\u003c\/h3\u003e\n\u003cp\u003eThe Jig is a Physical Product- shipped to you!! \u003cem\u003eAND you get a FREE Template ready to use after purchase designed specifically for this jig\u003c\/em\u003e .\u003c\/p\u003e\n\u003cp\u003e **Comes with Four 3mm screws that keep the jig solid on the F1 bed so you can duplicate EXACT cards over AND over again. Drop-in JIGS just don't have the precision - since they have to have more play to fit into the bed hole.\u003c\/p\u003e\n\u003cp\u003e**My jigs are always the tightest of tolerances (this one is within 0.5mm!). NO SLOP LIKE THE DROP IN STYLE JIGS.\u003c\/p\u003e\n\u003cp\u003e**Easy in and out finger slot. Fits 86x54mm cards. Jig is 3d printed out of plastic - but metal card engraving doesn't require long burns (if you did - you'd destroy your cards!). So no melting issues here (Read limitations below). Unlike a jig made out of wood, moisture will not cause this to warp or delaminate.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSPECS:\u003c\/li\u003e\n\u003cli\u003e+-Designed for XTool F1 Laser beds - but will sit on any Diode, CO2, Fiber bed.\u003c\/li\u003e\n\u003cli\u003e+-Bolt Spacing: EXACT XTool F1 bed bolt spacing. Bolt holes are for the 3mm bolts holes in the XTool F1 bed. 4 Bolts are included. They’re 20mm long so you can GRAB them EASILY.\u003c\/li\u003e\n\u003cli\u003e+-Fits 86x54mm Aluminum Cards (measure yours before you buy). Cards not included.\u003c\/li\u003e\n\u003cli\u003e+-Capacity: 1 Card. So you can bolt it down and close the smoke lid.\u003c\/li\u003e\n\u003cli\u003e+-Tolerances: Super Precise! There is only 0.5mm of play to allow easy in and out - tight enough for consistent accuracy.\u003c\/li\u003e\n\u003cli\u003e+-FREE Template file is made for XTool F1 Creative Space and is an .XCS file.\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eNOTE: Every machine has some slight differences- so make sure that 1. you’re focused - then 2. you may have to move the rectangle a half mm in any direction- but it was exact on our F1. also, the setting I have in the file is for black metal Biz cards - so you may have to change the engrave settings. and the word “test” is just there for your reference- yiu can delete it or use it for your settings. it’s customizable!!!\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFREE TEMPLATE INSTRUCTIONS\u003c\/em\u003e: free F1 Business Card Template file for XCS. It doesn't work with Lightburn or any other software other than X-Tool Creative Space as an .XCS file.  After checkout - you can download it. \u003cem\u003eNOTE\u003c\/em\u003e: This template is made for F1 - but the F1 \u0026amp; F2 share the same bed spacing. So you just save this template as an F2 template.\u003c\/li\u003e\n\u003cli\u003eLIMITATIONS: \u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003eDo not use for cutting. This is intended for marking new business cards - not cutting them. \u003c\/em\u003e\u003c\/span\u003eAsk questions before ordering!\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hot Fabs LLC","offers":[{"title":"Default Title","offer_id":47544252268797,"sku":null,"price":9.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/8669\/1069\/files\/ae879753-il_fullxfull.5273221742_kc90.jpg?v=1779403294"},{"product_id":"x-tool-f1-f2-pmag-magazine-laser-jig-tool-both-sides-included-fits-gen-2-3-magpul","title":"X-Tool F1,F2 - PMAG Magazine Laser Jig TOOL - Both Sides included (fits gen 2 \u0026 3 MagPul)","description":"\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e(COMPLIANCE STATEMENT: This is a Laser Engraving Jig Tool - NOT a “part”, doesn’t “attach” to any weapon - nor is it an accessory for that. It’s used for artwork). \u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eWHAT'S INCLUDED:\u003c\/p\u003e\n\u003cp\u003ePolymer Magazine (Magpul) Laser Jig Set for PMAG 30 rd 223\/556 mags. INCLUDES a Left and a Right (So, you only need ONE set).\u003c\/p\u003e\n\u003cp\u003eHOW IT WORKS:\u003c\/p\u003e\n\u003cp\u003eEASY DROP-IN mount for the XTool F1 \u0026amp; F2 Laser! (\u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003eDOESN'T Fit THE ULTRA\u003c\/em\u003e\u003c\/span\u003e - only fits the original F1 or F2 smaller lasers). Fits snug on mag \u0026amp; in F1 or F2 bed hole. 0.4mm or less tolerances.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eYou take the metal F1 or F2 laser bed base out and drop this in - No Bolts Required! Able to position 3 different ways \u0026amp; has a slot to keep the mag Perfectly Level!\u003c\/li\u003e\n\u003cli\u003eFITMENT: Only Fits Gen 2 and Gen 3 Magpul PMAGs. Many hours put into this design. 3d printed by me \u0026amp; used for Lasering my own. Again - you’re only buying the yellow colored jigs - JUST A TOOL.\u003c\/li\u003e\n\u003cli\u003eYou will receive 2 jigs - one left and one right. So only buy a quantity of ONE if you only want ONE set to do both sides of your jig.\u003c\/li\u003e\n\u003cli\u003eOTHER LASERS: we also sell a PMAG JIG TOOL for Fiber Laser Beds or other larger lasers for precise placement and reproducible results.\u003c\/li\u003e\n\u003cli\u003eFavorite our Store and Check those out! \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hot Fabs LLC","offers":[{"title":"Default Title","offer_id":47544252629245,"sku":null,"price":23.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/8669\/1069\/files\/2d688275-il_fullxfull.5587547547_1amz.jpg?v=1779403356"},{"product_id":"xtool-f1-f2-ultra-laser-guides-fences-8-pc-set-bolts-included","title":"XTool F1\/F2 ULTRA Laser Guides, Fences 8 pc Set + Bolts Included!","description":"\u003cp\u003e8 Piece XTOOL ULTRA (F1 or F2) Laser Guide\/Fences Set (12 pieces total including bolts).\u003c\/p\u003e\n\u003cp\u003e3D Printed Plastic Physical Item Shipped to you. The color is red.\u003c\/p\u003e\n\u003cp\u003eThe F1\/F2 Ultra's M4 bed bolts will fit snug through holes. For your Satisfaction- READ ALL BEFORE BUYING so you know what's included.\u003c\/p\u003e\n\u003cp\u003e**I ALSO sell a Guide\/Fence Set for the original (little brother) F1\/F2 in a different listing. \u003cem\u003eTHIS Listing is ONLY for the ULTRA\u003c\/em\u003e. We also have steel coin jigs!\u003c\/p\u003e\n\u003cp\u003eThis listing Includes a set of 4 size M4x10mm Stainless Bed Bolts that will thread into original Ultra Bed to hold these guides securely.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGUIDE SET INFO:\u003c\/li\u003e\n\u003cli\u003eTotal of 12 pieces. 8 Plastic guides are 10mm wide \u0026amp; 4mm thick.\u003c\/li\u003e\n\u003cli\u003eAny M4 size bolts (we supply 4) which screw into original Ultra bed will be snug - but slip through our guide holes.\u003c\/li\u003e\n\u003cli\u003eIncludes: 1 short cross; 1 large cross; 2 Three-hole straight guides. 2 Four-hole straight guides. 1 Large Corner guide. 1 Small Corner guide.\u003c\/li\u003e\n\u003cli\u003e4 Size M4x10mm BOLTS (0.7 pitch). Bolts are knurled on cap for grip. Also will take an allen key if desired. There's no need to really tighten guides down. When there are enough bolts in them - it's snug enough (I've tested it).\u003c\/li\u003e\n\u003cli\u003eNOTE that I can't accept returns as once you've put bolts through them - I have no way to re-sell them if you sent them back with the holes deformed.\u003c\/li\u003e\n\u003cli\u003eCHECK OUT MY OTHER Ultra \u0026amp; F1 JIGS !! On MY SHOP. ASK QUESTIONS BEFORE ORDERING IF YOU HAVE ANY.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hot Fabs LLC","offers":[{"title":"Default Title","offer_id":47544252760317,"sku":null,"price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/8669\/1069\/files\/fbc7daef-il_fullxfull.7556694653_p1d7.jpg?v=1779403413"},{"product_id":"xtool-f2-ultra-fiber-laser-universal-tumbler-jig","title":"XTool F2 Ultra\/Fiber Laser Universal Tumbler Jig","description":"\u003cblockquote\u003e\n\u003cp\u003e\u003cstrong\u003eThis Universal Drinkware Jig fits XTOOL ULTRA Series \u0026amp; FIBER LASERS. Mounts to XTOOL F1\/F2 Ultras, F2 Ultra UV AND Fiber Laser Beds (which use 25mm or 50mm spacing),\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e🟢 \u003cspan style=\"text-decoration: underline;\"\u003eWHY IS OUR DESIGN UNIQUE\u003c\/span\u003e: You may notice that our shop is unique in that we make many jigs UNIVERSAL - meaning that they often fit many machines - not just Xtool or not just Fiber....\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1. \u003cstrong\u003eUNIVERSAL MOUNTING\u003c\/strong\u003e. No need to buy another - ours mounts to FIBER \u0026amp; ULTRA Lasers. One for all your larger galvo machines.\u003c\/li\u003e\n\u003cli\u003e2. \u003cstrong\u003eBOTH ENDS SLIDE!\u003c\/strong\u003e Endless combo \u0026amp; positioning.\u003c\/li\u003e\n\u003cli\u003e3. \u003cstrong\u003eSTEMWARE SLOTS\u003c\/strong\u003e (i.e. wine\/champagne) - automatically center glasses with stems. Also, double as alignment guides.\u003c\/li\u003e\n\u003cli\u003e4. \u003cstrong\u003eSTEPPED RAMP HEIGHT ADJUSTMENTS\u003c\/strong\u003e. Some others are just a smooth ramp. This gives firm adjustments with no chance of slipping accidentally.\u003c\/li\u003e\n\u003cli\u003e5. \u003cstrong\u003eHANDLE LEVELER\u003c\/strong\u003e. While some other have this, our jig has SLOTS and the round buttons in the spacers which allow you to slide it for flexible positioning - AND you get 6 lockable, stackable spacers which allow from 37mm-59mm of rise to meet any tumbler, cup or mug handle. 6. The HANDLE LEVELER SPACERS CAN ALSO BE USED to adjust cup level on the stepped ramp in case you have difficulty using the built in steps to conform for a shorter cup or one with a curvy shape. This allows for even more fine tuning.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e🟢\u003cstrong\u003eCONSTRUCTION\u003c\/strong\u003e: Ours is made from PETG, which is stronger and less brittle than PLA. Obviously, don't hit it with a laser LOL.. But even so, you could mark it with a UV and be ok. See photos to get an idea of the usage and range.\u003c\/p\u003e\n\u003cp\u003e🟢\u003cstrong\u003eWHAT IS INCLUDED\u003c\/strong\u003e: 8 plastic pieces in the jig set. (1. Upper Jig Mount 2. Ramp Jig Mount 3. 6 pieces making up the handle leveler system.)\u003c\/p\u003e\n\u003cp\u003e🟢\u003cstrong\u003ePRECAUTIONS\u003c\/strong\u003e: **XTool lids may not close completely depending on how large an item you are engraving and its orientation. Please SEE photos for examples. **Lasers can emit fumes and cause fires. Please take precautions for safe use of your laser. **Do not laser the jig itself. It’s plastic and flammable. **Never leave your laser unattended. **NOT INCLUDED - but may have been in photos: bolts,screws,cups,mugs,tumblers,glasses,machines, any other tools which may have been in photos other than the 8 plastic pieces mentioned for the set. ** Ultras take an M4 bolt. The Fibers take an M6 bolt. Available at hardware or Amazon stores. NOTE: During a sale, Etsy may erroneously indicate free shipping- but it only applies if your ordered items are $35 or more. I am working with Etsy to correct their systems.\u003c\/p\u003e\n\u003cp\u003e🟢PLEASE Ask questions before you buy. Also before leaving less than 5 stars on your feedback - please give us a chance to make it 5 stars! :-) ⭐️⭐️⭐️⭐️⭐️\u003c\/p\u003e\n\u003c\/blockquote\u003e","brand":"Hot Fabs LLC","offers":[{"title":"Default Title","offer_id":47544252989693,"sku":null,"price":34.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/8669\/1069\/files\/21dff3f4-il_fullxfull.7645392672_gv7y.jpg?v=1779403435"},{"product_id":"4-coaster-laser-jig-two-pack-laser-engraving-tool","title":"4\" Coaster Laser Jig - Two Pack, Laser Engraving Tool","description":"\u003cp\u003eThis Laser Jig will Securely Hold 4” Coasters For Laser Engraving.\u003c\/p\u003e\n\u003cp\u003eThis pack includes TWO jigs in your purchase that will hold a total of 2 coasters. They are 3d printed by me and have a notch at the top to accommodate slight variations in size. The slate coasters in the photos are not included in the listing - but are what I use.\u003c\/p\u003e\n\u003cp\u003eThe coasters I used in the photos above are 3.8” (100mm) so they fit perfectly and are not too “tight”. You can also use the cork, wood, or whatever type as long as they FIT in the jig. The inner diameter of the circle in the jig is EXACTLY 4” (102mm) diameter. If your coasters are slightly large (like 4.1”), my jig has a notch and is flexible so you can spread it a little and get a good fit.\u003c\/p\u003e\n\u003cp\u003eThe notch also helps with removal. The outside dimensions of the outer frame of the jig is 120mm x 158mm. If you order 2 sets, I can fit up to 4 of the jigs in one envelope to ship to you. \u003cem\u003eTIP- I recommend having a small L shaped carpenters square attached to your spoilboard. \u003c\/em\u003eThat will assure you get perfect alignment every time.\u003c\/p\u003e\n\u003cp\u003eQuestions?? Please message Me! LICENSE \u0026amp; USE AGREEMENT: Do not copy our designs and re-sell them. However, you may sell the coasters you lasered while being held by this jig of course!\u003c\/p\u003e","brand":"Hot Fabs LLC","offers":[{"title":"Default Title","offer_id":47544252956925,"sku":null,"price":3.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/8669\/1069\/files\/be0fef75-il_fullxfull.4618715323_m7yb.jpg?v=1779403470"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0820\/8669\/1069\/collections\/E4C4C240-178C-43A9-A2C6-B9B1F85CC284_c7f2eaf7-3a95-4b65-942e-273fa02d2d70.jpg?v=1779402865","url":"https:\/\/hotfabs.com\/collections\/laser.oembed","provider":"Hot Fabs LLC","version":"1.0","type":"link"}